Shopping Cart
For help & support 01630 350050
Free UK Delivery - over £50
Hassle Free Returns
Price Match Promise

Hawkmoto Frm Kids Mini Moto Quad Bike 49cc 50cc - Green

SKU:ATSA50D_GREEN

£319.95

Item out of Stock
Elementor single product #8277
Elementor Single Product #8277
Elementor Single Product #8277
Colour: Green

Out of stock

Goes well with....

 

Hawkmoto FRM Kids Mini Moto Quad Bike 50c

Hawkmoto FRM Kids Mini Moto Quad Bike 50c is top of the range when we are looking at build quality that surpasses all other Mini Moto quad Bikes on the market today.

Have a qualified mechanic build this, check for any faults, and set up ready to put fuel in and run. We charge an £89.00 build fee and  deliver this on a pallet

This Hawkmoto FRM Kids Mini Moto Quad Bike 50c looks fantastic with its authentic farm style design, Chrome suspension and colour coded wheel rims it delivers features including larger diameter 6-inch wheels and chunky tyres, upgraded 140mm drilled disk brakes with EBC pattern pads all around.

The Hawkmoto FRM Kids Mini Moto Quad Bike 50c is 2021 Edition boasts a 50cc two-stroke engine, 190mm fully adjustable shocks front and rear, sealed Super Dry long life wheel bearings, 2 spring heavy duty racing-style clutch and great sounding twin debaffled exhaust system.

The 6 Inch Wheels on this mini moto quad make off-road riding effortless having more clearance from the ground than most of the mini moto quad bikes available on the market today.

The mini moto quad safety features have not been overlooked either with a safety cut-out tether, adjustable throttle restrictor and full wraparound foot plates to keep the rider’s feet away from the moving wheels.

All these features make the Hawkmoto 50cc Kids Mini moto quad bikes stands out from the other crowd and other available mini moto quads on the market.

Aimed at younger kids where the lightweight and nimble handling make them easier and safer to ride. The power can be restricted to provide the appropriate amount of power for the rider’s ability plus there is a safety tether that can be operated by the parent for extra security.

This kids Bike has been designed with safety in mind and conforms to current EU and CE standards. The safety features include a throttle restrictor to slow the Quad down to a safe pace if required, allowing the rider’s confidence to grow. Then as the rider’s proficiency improves simply open up the throttle settings and the machine will allow more performance.

There is also a Safety Tether which can either be used on a long lead to enable you to stop the Quad should the rider lose control or attached to the rider’s wrist to bring the Quad to a safe halt should the rider become unseated.

  Hawkmoto FRM Kids Mini Moto Quad Bike 50cc 49cc Kids Mini Moto Quad Bike Exhaust 49cc Kids Children Frm Petrol Quad Bike 50cc 2 Stroke Top Speed 25mph 49cc Kids Children Frm Petrol Quad Bike 50cc 2 Stroke Top Speed 25mph

Hawkmoto FRM Kids Mini Moto Quad Bike 50c Specification

  • 49cc 2-stroke air-cooled latest generation engine
  • 5kw at 8700rpm
  • Easy Start Pull Start
  • Larger 6″ wheels
  • 190mm front and rear adjustable shocks
  • Front and Rear 140mm Disk Brake
  • EBC pattern pads front and rear
  • KMC 420 pitch Chain
  • Wrap-around Super Slide Swingarm Chain Sliders
  • Chrome Minibike Pro Taper style Bars
  • Soft black Super grip Bar grips
  • Recessed & Sealed Super Dry Long Life Wheel Bearings
  • Net weight 45 kg
  • Recommended Max Load 75kg (12 Stone)
  • Dimensions: 1000mm length, 590mm width, 630mm height
  • Designed for off road use only – not to be used on a public highway
Mini Quad Build, Maintenance, Fuel Mix and Troubleshooting

Additional information

Weight 80 kg
Dimensions 108 × 48 × 48 cm
Battery Type

Lead Acid

Clutch

Automatic

Gears

Automatic

Engine Spec

2 – Stroke

Engine

50cc

Engine Oil

2 – stroke semi synthetic

Rim Size

6in

Suspension

Twin Front – Single Rear

Colour

Green

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Continue as a Guest

Build Information

This Quad Bike you have bought is one of the best available in its price bracket We put every conceivable effort into sourcing and specification in order that you will enjoy your machine to the full.

Your bike will  be supplied in a crate. This is NOT the same as buying a bike fully PDI’d (Pre-Delivery Inspection) bike from a dealer. It is entirely your responsibility to ensure a qualified motorcycle mechanic puts your bike together correctly. Failure to do so will invalidate the warranty supplied with your bike.

GUIDE FOR ASSEMBLY

This document is supplied only as a guide to a professional and may not be exhaustive. Each machine may require individual attention & therefore ONLY qualified persons should only carry out the following:

  • Remove Bike & all accessories from crate & inspect to ensure all necessary parts have been supplied correctly
  • Mount shock (where applicable)
  • Mount front wheels & ensure free rotation – check for potential bearing &/or brake drag Ensure all frame bolts are tight (use thread lock compound where necessary) – Use locking wheel nut (supplied) install locking split pins into each castle nut.
  • Pump front brake lever until firm (bleed if necessary). Check front braking system for potential leaks or damage by pulling brake lever very hard several times. Visually inspect all joints for leaks & remedy where necessary. Spin wheel to ensure calliper is releasing from disk
  • Check brake fluid levels, top up with DOT4 where necessary
  • Fit front footwells using thread locking compound where required
  • 2 Stroke mini quads and mini bikes mix fuel at 25:1 Ratio using a quality semi synthetic 2 stoke motorcycle oil. DO NOT USE GARDENING OR MOWER 2 STROK OIL it fouls the plug and causes the bike to misfire, bog out and not start.
  • 4 Stroke 110cc and 125cc use straight unleaded fuel and replace engine oil as below 

IMPORTANT! CHAIN ADJUSTMENT

Before First Ride

  • Loosen rear axle & adjust chain tension. Find tightest point in chain by spinning rear wheel, there should 15mm up & 15mm down at the longest section of chain with rider sat on bike. Ensure chain runs true & is on top of chain roller if your models has one.
  • You can ensure chain runs true by eye then by straightening the front wheels and measuring from wheel rim front to wheel rim rear and repeating on opposite side the measurements should be same both sides. If this measurement is out your axle needs aligning and your chain will come off as its not running true.

When aligning chains its important to loosen off the top and bottom axle bolts before attempting the chain adjusters otherwise you will thread the adjusters as it tries to pull a fixed solid axle. Chain adjusters must be adjusted evenly on both sides to keep the axle square otherwise you risk throwing your chain off and damaging your engine.

Chain tension must be done with the rider on the quad bike as each rider weight will change the chain tension needed.

Nut and Bolt Check

  • Working from front to rear, ensure all nuts & bolts are tight. Where no nyloc nuts or spring washers are present, ensure thread-locking compound has been used. If none has been used during factory assembly, remove nut or bolt, apply locking compound & re-tighten. Pay particular attention to the following critical safety areas: Wheel nuts, brake calliper bolts (thread lock), Top & rear engine bolts (frame must be hard tight against the engine, use thread lock), chain tensioners, rear shock bolts, handlebar clamp bolts (yokes), Handlebars, brake/ clutch/throttle, swing-arm, front & rear sprocket, Exhaust Bracket Bolts,
  • Check all engine hardware is tight, (including but not exclusive): flywheel, inlet manifold, exhaust bolts,
  • Fully ensure nothing is touching the exhaust system including fuel lines are tied away.
  • Ensure all cables and pipes & wiring are away from moving components such as the wheels, use cable ties where necessary
  • Fuel bike & check for fuel leaks

Fill and Check oil level with quad bike in upright position using dipstick. Top up with Lucus Oil 10W 40 semi synthetic motorcycle oil, if necessary

  • Adjust tension for both clutch & throttle cables
  • Ensure wheels are tight & wheels run true
  • Start engine & warm up (using choke if necessary). Set idle speed so engine ticks over comfortably without stalling or racing

(bearing in mind that the pads will need to bed in prior to optimum performance

1 HOUR SERVICE – EXTREAMLY IMPORTANT

  • Remove Transport Oil & replace with Lucus Oil 10w 40 4-stroke engine oil
  • Re-Adjust throttle cable & clutch cable if required
  • Re-tension chain as this will stretch in the first hours of use. This will need continual monitoring.
  • Check wheel bearings for any sign of wear of free-play
  • Check Engine Idle Speed and adjust if necessary
  • Check brake calliper operation & brake pad wear
  • Check tyre pressures 4-6 psi

RIDING TIPS FOR LONG ENGINE LIFE - IMPORTANT

Every 4 hours use.

  • Do not use the gears which the bike is in motion.
  • Check all nuts & bolts & tighten where necessary as above PDI
  • Re-Adjust throttle cable & clutch cable if required
  • Re-tension chain as this will stretch in the first hours of use. This will need continual monitoring.
  • Check wheel bearings for any sign of wear of free-play
  • Check brake calliper operation & brake pad wear
  • Check spark plug gap ~0.6mm-0.7mm
  • Check tyre pressures 4-6 psi

PROBLEM SOLVING

  • No spark – Either poor earth or faulty Rotor Coils/CDI/Coil/Lead/Cap/Plug – use moving coil mustimeter to diagnose
  • Fuel leaks from overflow – Floats set incorrectly or blocked by debris or sticking
  • Engine runs fine, but then starts to misfire – faulty rotor coils/CDI/Coil/Plu
  • Engine will not tick over when warm – readjust the engine idle
  • Engine will not return to idle & races – sticking throttle cable or idle incorrectly set on the carb.

STORAGE.

  • It is advisable to fully service and lubricate the bike prior to leaving the bike unused/unattended for any length of time.
  • It is advisable to fully drain the tank and carb of fuel prior to leaving the bike unused/unattended for any length of time.

BUILT QUAD BIKES

Where quad bikes have been pre-assembled you are still required to

  1. Nut and bolt check the quad bike before use.
  2. Check chain tension is suitable for the weight of the rider.
  3. Follow the 1 hour and 4 Hour service

49cc Mini Dirt Bikes and Mini Quad Bikes

98% of problems are caused by incorrect fuel mixture and incorrect 2 stroke oil used. Mix at 25:1 ratio or debris blockage of the fuel tap.

Use a quality semi synthetic motorcycle 2 stroke oil and not gardening 2 stoke oil as gardening 2 stroke is a completely different compound of oil and clogs the spark plugs up and causes them to be difficult to start

NEVER YANK THE PULL STARTER WITH FORCE - You will snap the pull cord and these are not a warranty item. Small short pulls are all you need as the pull start is spring assisted.
Unfortunately " it was already frayed when it arrived" is an excuse we hear of everybody who snaps them. We build and start 100s of mini bikes a week and never snap pull starts.

They only snap in frustration normally because the oil mix is wrong and your relentlessly yanking at it.

People Also Looked At

Why choose outside play?

01.

Fast Delivery We use FedEx and DHL Parcel Service for fast, reliable deliveries.

02.

Huge UK Stocks Our distribution centre holds stock ready for fast UK delivery.

03.

Open Mon-Fri Our friendly customer support team is here to help Mon-Fri.

04.

Leading Brands We stock all the latest products from leading brands.